QH-J2200 6kg Load Foldable Light Stand
› Portable aluminium light stand
› 3-sections, Max 2230mm working height
› 700mm folded height for storage
› Max 6kg load
› 5/8" baby pin male head
› With 1/4" and 3/8" screw bolt
› Built-in buffer springs
6kg Load Light Stand
QH-J2200 is a portable light stand of 6kg load, for majority of light fixtures set up. The 3 sections and foldable feet support 2230mm Max working height and only 700mm folded height, for convenient carrying and storage.
Multipurpose Head
QH-J2200 light stand provides a multipurpose head of 5/8" (16mm) baby pin male, with 1/4" and 3/8" screw heads for various video device install.
Buffer Spring Inside
The light stand has built-in buffer springs to ensure smooth height adjustment and prevent pinching fingers.
Model | QH-J2200 |
Material | Aluminium |
Section | 3 |
| Fold height | 700mm |
Max height | 2230mm |
Head | 5/8" baby pin male with 1/4" and 3/8" screw head |
Load | 6kg |
Tube diameter | 22/25/30mm |
Weight | 1.5kg |
MSRP
MSRP
MSRP
We provide a 1-year conditional warranty, and the following damages/issues are not covered under warranty:
(1) Any damage or malfunction caused by use, maintenance, or storage not in accordance with the User Manual’s instructions, including but not limited to exceeding the maximum load capacity, improper locking of leg sections or center column, exposure to corrosive environments (saltwater, chemicals), or disassembly/repair without authorization of SWIT.
(2) Any damage caused by using third-party accessories such as heads, quick-release plates, adapters, or extension devices that are incompatible with the tripod’s specifications.
(3) Any damage caused by irresistible factors (such as earthquake, fire, lightning, flood, etc.) or human factors including accidental dropping, impact, sand/grit ingress, improper transportation packing, or forced operation of frozen or jammed locks.
(4) Any damage or malfunction not caused by the product’s design, workmanship, or manufacturing quality — including normal wear and tear of rubber feet, leg angle locks, friction pads, bubble levels, or finish scratching.
