QH-J288C 8kg Load Foldable Light Stand
› Portable aluminium light stand
› 3-sections, Max 2500mm working height
› 1050mm folded height for storage
› Max 8kg load
› 5/8" baby pin male head
› With 1/4" and 3/8" screw bolt
› Built-in buffer springs
8kg Load Light Stand
QH-J288C is a portable light stand of 8kg load, for majority of light fixtures set up. The 3 sections and foldable feet support 2500mm Max working height and 1050mm folded height, for convenient carrying and storage.
Multipurpose Head
QH-J288C light stand provides a multipurpose head of 5/8" (16mm) baby pin male, with 1/4" and 3/8" screw heads for various video device install.
Buffer Spring Inside
The light stand has built-in buffer springs to ensure smooth height adjustment and prevent pinching fingers.
Model | QH-J288C |
Material | Aluminium |
Section | 3 |
| Fold height | 1050mm |
Max height | 2500mm |
Head | 5/8" baby pin male with 1/4" and 3/8" screw head |
Load | 8kg |
Tube diameter | 25/30/35mm |
Weight | 1.65kg |
MSRP
MSRP
MSRP
We provide a 1-year conditional warranty, and the following damages/issues are not covered under warranty:
(1) Any damage or malfunction caused by use, maintenance, or storage not in accordance with the User Manual’s instructions, including but not limited to exceeding the maximum load capacity, improper locking of leg sections or center column, exposure to corrosive environments (saltwater, chemicals), or disassembly/repair without authorization of SWIT.
(2) Any damage caused by using third-party accessories such as heads, quick-release plates, adapters, or extension devices that are incompatible with the tripod’s specifications.
(3) Any damage caused by irresistible factors (such as earthquake, fire, lightning, flood, etc.) or human factors including accidental dropping, impact, sand/grit ingress, improper transportation packing, or forced operation of frozen or jammed locks.
(4) Any damage or malfunction not caused by the product’s design, workmanship, or manufacturing quality — including normal wear and tear of rubber feet, leg angle locks, friction pads, bubble levels, or finish scratching.
