S-8970 SONY L Series DV Camcorder Battery Pack
› Li-ion battery pack of 7.2V nominal voltage
› Comparable to SONY L series DV batteries
› Display remaining power info on camera viewfinder
› 47Wh / 6.6Ah capacity
› Multiple circuit protections
SONY L series battery
Display remaining power info
S-8970 is the replacement battery for SONY NP-F970,
compatible with SONY HVR-V1/Z1/Z7, DSR-PD190,
HD1000E, etc. S-8970 can exchange digital info with the
cameras, and display remaining power info on the camera
viewfinder.
47Wh / 6.6Ah High Capacity
With 7.2V nominal voltage, the S-8970 has 47Wh / 6.6Ah capacity,
and can run approx 5.5 hours on SONY HVR-Z1 camcorder when
LCD monitor is on.
Easy Charging
The S-8970 can be charged on SWIT Dual channel charger
S-3602F or 4-ch charger LC-D421. It takes about 4 hours and
30 minutes to charge from empty to 100%.
Nominal Voltage | 7.2V |
Capacity | 47Wh, 6.6Ah |
Max output power | 30W, 4A |
Compatible cameras | SONY HVR-Z1/Z5/Z7/V1; |
| SONY DSR-PD150/170/190; | |
| SONY NEX-FS100/700/EA50; | |
SONY NXR-MC2000/HD1000; | |
Dimension | 71×39×60mm |
| Charging Temperature | 0-40°C |
| Discharging Temperature | -20°C-50°C（Capacity and Max Load may decrease when operating below 0°） |
Net weight | Net 280g; With package0.3kg |
MSRP
$8222
MSRP
$8222
MSRP
$8222
We provide 1 year conditional warranty, and the following damages/issues are not covered under warranty:
(1) Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorization of SWIT.
(2) Battery performance declines, cannot be charged or any charging errors caused by using third-party chargers.
(3) Battery capacity naturally decreased after a certain cycle times of charging and discharging.
(4) The capacity loss caused by over 6-month’s storage, and not charging the battery to re-active it during the period.
(5) Any damage caused by irresistible factors (such as earthquake, fire, lightning etc.) or human factors.
(6) Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.
