› 416pcs ultra bright long-life LEDs
› Surface mounted LED technology
› 120°(half-declined 65°) wide beam angle
› 3200K-6500K continuously adjustable
› 15W power, 550Lux @ 1 meter center
› 0-100% flick-free dimming
› Super high CRI 95, TLCI 97
› Built-in NP-F battery plate
› Provide snap-on diffuser
416pcs SMD-LEDs
Bright and wider beam angle
CL-15 is an 15W bi-color on-camera LED light, with
416pcs ultra bright SMD LEDs, equally spread wider
beam angle, accurate color render and longer life time.
Super wide beam angle
LED 120°; Half-declined at 65°
The SMD LED of CL-15 has 120° wide beam angle,
and generates an equally spread, wider area light
comparing to traditional DIP LED bulbs.
Take center illuminance as 100% brightness, when
declined to 50% at the edge, the "half-declined" beam
angle can still reach to 65°, which means the light is
equally spread onto the whole environment, instead
of just concentrated at center.
Bi-color temperature
3200K-6500K continuously adjustable
CL-15 mixed with 3200K and 6500K SMD-LEDs, and the output color temperature can be continuously adjustable from 3200K to 6500K.
The bi-color SMD LED is more reliable and has better consistency on color temperature.
High Color Reveal Ability
CRI 95; TLCI 97
CRI (Color Rendering Index) is a measure of the ability
of a light source to reveal the colors of various objects
faithfully in comparison with a natural light source.
And TLCI (Television Lighting Consistency Index) is
special for the color reveal ability by camera sensor.
Max value 100.
The normal LED light has 80-85 CRI or TLCI, while
CL-15 offers the super high CRI at 95 and TLCI at 97,
and will not lose the object original colors.
Dimmer/CCT Control
CL-15 provides 0-100% Dimmer knob and
3200-6500K color temperature knob, for
easy adjustment.
Built-in NP-F Battery Plate
CL-15 has built-in an NP-F DV plate, to power by NP-F batteries. Beside the plate the CL-15 provides
4-level battery power indicator to show remaining capacity of the battery.
Diffusing Cover
With organic light diffusion agent
CL-15 provides a diffuser cover, to be attached on
the front of LEDs. The diffuser cover adopts the PC
material with organic light diffusion agent, which
increased the transmission of light, and provides a
soft, glareless and comfortable lighting effect.
LED | 416 pcs SMD LEDs |
Illuminance | 550Lux @ 1 meter |
Beam Angle | LED 120°; Half decline at 65° |
Color temperature | 3200K ～ 6500K |
Color render | CRI 95; TLCI 97 |
Working voltage | DC 7.2V～8.4V, NP-F battery only |
Power consumption | Approx. 15W |
Dimensions | 174(W)×92(H)×19(D)mm |
weight | Net 145g; With package 0.2kg |
MSRP
MSRP
MSRP
-
Diffusing Cover
-
S-2712
12W Pocket RGBW SMD LED Light
CCT mode, HSI mode, 20x Demo effects, Built-in 3000mAh battery, USB-C charging
1. Warranty Period
We provide 1 year conditional warranty for lighting products.
2. Exclusions from Warranty Coverage
The following damages, malfunctions, failures, or safety incidents, including but not limited to damage to LED emitters, circuits, or housings, personal injury, or property loss, are not covered under warranty, and SWIT shall bear no liability therefor:
(1) Non-Compliance with Operating Procedures
Operation, installation, or removal of equipment and accessories not in accordance with the User Manual; forcible removal of connection cables or power cables; obstruction of heat dissipation vents; direct visual exposure to LED emitters; failure to follow the prescribed sequence for startup/shutdown or wiring.
(2) Non-Compliant Power Supply and Accessories
Use of non-original SWIT power supplies, power cables, chargers, optical accessories, or other uncertified third-party accessories; powering the product with third-party power adaptors; use of extension cables or power adaptors with mismatched rated parameters.
(3) Unauthorized Modification and Repair
Unauthorized disassembly, modification, or repair of the equipment; tampering with core components or circuits; failure to contact SWIT authorized after-sales service upon equipment malfunction, resulting in unauthorized repair or aggravated damage by non-authorized personnel.
(4) Misuse and Adverse Environmental Conditions
Damage resulting from dropping, impact, compression, puncture, water immersion, exposure to high temperatures or direct sunlight, extreme cold, humidity, excessive dust, or other non-normal use environments or human-inflicted damage.
(5) Failure to Address Abnormal Conditions
Continued operation despite abnormal conditions such as overheating, abnormal odor, or abnormal noise, resulting in damage or safety incidents; use of damaged or malfunctioning accessories or batteries in violation of regulations.
(6) Out-of-Specification and Incompatible Use
Operation beyond the equipment's rated parameters; use in incompatible systems or environments; failure to implement protective measures during outdoor use, resulting in damage from severe weather conditions.
(7) Force Majeure and External Factors
Damage caused by irresistible factors (including but not limited to earthquake, flood, or typhoon), sudden voltage fluctuations, or external circuit short circuits.
(8) Natural Wear and Tear
Normal aging of LED emitters, wear of accessories, and other natural degradation of the product.
(9) Improper Storage
Failure to store equipment and accessories in accordance with prescribed specifications, resulting in moisture ingress, dust accumulation, or component corrosion.
(10) Non-Authentic Products and Ineligibility
Products not purchased through official SWIT channels, or products with altered or missing serial numbers that preclude verification of authenticity and warranty eligibility.
(11) Liability Disclaimer
All risks and consequences arising from improper use, human factors, or external factors shall be borne entirely by the user.
(12) Non-Quality Defects
Any damage or breakdown not caused by the product's design, workmanship, or manufacturing quality.
